PRODUCTS
Professional values. a first-class quality
AT-PTFE Coated Pneumatic Actuator
PTFE Coated Pneumatic Actuator
Actuator Body: Aluminium alloy with PTFE coat
Piston: Aluminium Alloy
Shaft: Nickle Alloy Plated Steel
Temperature: -20℃--+85℃
Torque: 3.5 - 4150Nm
Air-Pressure: 2.5 - 8 bar
Motion time: 0.25-3S
Type: Double Acting, Spring Return(Single Acting)
Adjustment Range: ±5°
Feature: Anticorrosion, PTFE coating
Two Layers:
Under Layer: Anodic oxidation, 50--80um thickness
Up Layer: PTFE-coating, 100---200um thickness
Pneumatic Actuator AT Series (Double-Acting & Single-Acting)
I. Actuator Body
Boy material is aluminium alloy. Internal and external surface are treated with anodic oxidation and polishing. Outer surface is nickle plated so that the anti-corrosion fuction of actuator and minimum friction against pistons can be guaranteed.
II. End Cover
End cover material is die-casting aluminium. End cover is treated with epoxy polyester so as to best guarantee the anti-corrosion performance.
III. Drive Shaft
The drive shaft material is medium carbon steel with fine processing and nickle plating so that the pistons have better quality in anti-corrosion, anti-friction, etc.
IV. Piston
Piston material is die-casting aluminium alloy. Maxmium torque can be output when the actuator is actuated with certain pressure.
V. Piston Seal
NBR-70 rubber sealing is applied to ensure the normal and reliable performance of actuator under normal temperature. FPM can be also applied according to clients' requirements.
VI. Travel Adjustment
Plus/Mimus 5 degree travel can be adjusted through the two bolts.
Drawing