| Quantity: | |
|---|---|
Advantage
▶ Hygienic cut-off/switch valves offer more safety, cleanliness, durability, and aesthetics.
▶ With an open bracket, the actuator and body are dissociated, allowing direct shaft seal inspection.
▶ The design makes the transmission and product partially separated to prevent heat transfer from the body to the actuator.
▶ The condition “No” and “NC” can be changed instantly.
▶ The spherical body has ideal flowability and cleaning properties. Also, the material treatment is more moderate.
▶ The standard valve design ensures the coupling combination has a high degree of spirit, activity, and diversity.
▶ Metal stop ensures a longer seal life.
▶ Fast and convenient assembly and maintenance operations.
Material
▶ Material Contact Parts: 304 or 316L stainless steel.
▶ Sealing material: standard EPDM, Silica gel, fluorine gel (optional).
Surface Treatment
▶ Outside: Sandblast Ra ≤ 1.6 μm
▶ Sublight Ra ≤ 0.8 μm
▶ Inside: Polish Ra ≤ 0.4 μm
Requirements For Compressed Air Quality That The Executor Needs
▶ Compressed air joint: air pipe equipped with air adapter R1/8"
▶ Max grain size: 0.01 mm
▶ Max oil content: 0.08 ppm
▶ Dew point: below 10°C or less
▶ Max water content: 7.5 g/kg
Advantage
▶ Hygienic cut-off/switch valves offer more safety, cleanliness, durability, and aesthetics.
▶ With an open bracket, the actuator and body are dissociated, allowing direct shaft seal inspection.
▶ The design makes the transmission and product partially separated to prevent heat transfer from the body to the actuator.
▶ The condition “No” and “NC” can be changed instantly.
▶ The spherical body has ideal flowability and cleaning properties. Also, the material treatment is more moderate.
▶ The standard valve design ensures the coupling combination has a high degree of spirit, activity, and diversity.
▶ Metal stop ensures a longer seal life.
▶ Fast and convenient assembly and maintenance operations.
Material
▶ Material Contact Parts: 304 or 316L stainless steel.
▶ Sealing material: standard EPDM, Silica gel, fluorine gel (optional).
Surface Treatment
▶ Outside: Sandblast Ra ≤ 1.6 μm
▶ Sublight Ra ≤ 0.8 μm
▶ Inside: Polish Ra ≤ 0.4 μm
Requirements For Compressed Air Quality That The Executor Needs
▶ Compressed air joint: air pipe equipped with air adapter R1/8"
▶ Max grain size: 0.01 mm
▶ Max oil content: 0.08 ppm
▶ Dew point: below 10°C or less
▶ Max water content: 7.5 g/kg
